oPinion BLT

Pinion gear box with 18 gears, 636% ratio bandwidth and very finely 11% spaced gear steps

Now available as an option on all our oPinion and oPinion BLT models.
The advantages and technical features of this hub speak for themselves. It has a completely new freewheel design, the so-called "Sprag Clutch". As a result, the hub works completely quiet and the power transmission begins without delay.

• Absolutely quiet "mute"
• Durable ceramic bearings
• Power transmission without delay (instant engagement)
• Easy to disassemble - no special tools needed

Gates Carbon CDX belt drive

The USE Duro Titan combines robustness, clever saddle clamping, low weight and comfort. Developed for the toughest off-road use, the titanium seat post springs noticeably better than aluminum supports and most carbon posts. Maximum riders weight 85Kg.

The G.2 ST suspension seat post scores with fine response behavior and driving comfort thanks to the proven parallelogram spring mechanism and IGUS polymer high-performance plain bearings, and that with only 100 mm installation height and 30 mm spring travel. This makes long, fatigue-free daily stages possible, even on bad roads.

Light, strong and corrosion resistent is the Tubus Liviano Titanium Rear Carrier. Compared to the standard steel Logo you will save 240 grams of weight but still remains the loading capacity. The transported goods will not damage any corrosion resistent coating because Titanium doesn't need any corrosion protection.

Light, strong and corrosion resistent is the Tubus Duo Titanium Low-Rider. Compared to the steel version there you will save 260 grams of weight but still retains the same loading capacity. You're panniers will not leave marks on the Low-Rider because Titanium doesn't need a coating to be protect from the weather.

Height-adjustable bottle holder.

• For 1-1.5 liter bottles
• Solid 3-point attachment
• Suitable for your idworx bike
• Adjustable length: 300 - 330mm
• Suitable diameter: 90mm
• Mounting on the down tube

Set of 2 height-adjustable bottle holders.

• For 1-1.5 liter bottles
• Solid 3-point attachment
• Suitable for your idworx bike
• Adjustable length: 300 - 330mm
• Suitable diameter: 90mm
• Mounted on the right and left of the fork

- 40% lighter than a butyl tube of the same dimensions.
- low rolling resistance at tubeless level
- high puncture resistance

We recommend this headset with integrated steering damping if you want to make maximum use of the driving comfort potential of the wide tires and therefore drive them with the lowest possible inflation pressure. In particular, touring cyclists who load their idworx with a lot of luggage benefit from the resulting, even more solid self-steering behavior.

idworx stands for consistent development. Therefore, the logical step was to take our aluminum trekking fork to the next evolutionary stage.
The result was our new DaFork full carbon trekking fork. The highlights are:
- low weight (approx. 500 g weight saving compared to the aluminum version)
- tapered full carbon shaft, designed for extreme loads
- flat mount brake assembly
- integrated brake line and cable routing
- SL contact for plug-free hub dynamos
- replaceable thread inserts for low rider and mudguard assembly
- additional mounting points for bike packing equipment or additional bottle holders
- available in UD matt and UD glossy
- max. brake disc diameter 180mm (not compatible with iBD and our new medium disc for Shimano.)
Available from April 2025

idworx stands for consistent development. Therefore, the logical step was to take our aluminum trekking fork to the next evolutionary stage.
The result was our new DaFork full carbon trekking fork. The highlights are:
- low weight (approx. 500 g weight saving compared to the aluminum version)
- tapered full carbon shaft, designed for extreme loads
- flat mount brake assembly
- integrated brake line and cable routing
- SL contact for plug-free hub dynamos
- replaceable thread inserts for low rider and mudguard assembly
- additional mounting points for bike packing equipment or additional bottle holders
- available in UD matt and UD glossy
- max. brake disc diameter 180mm (not compatible with iBD and our new medium disc for Shimano.)
- Available from April 2025

DaRim LaW-Trekking hooked Carbon rim (29"). Extra wide 30 mm carbon rims for any type of tires.
Probably the most sensible option to improve the performance of your idworx even further. The larger inner width of the rim improves the support of wide tires, which are so typical for idworx. Therefore, you can reduce the tire pressure even further to increase traction and riding comfort. The bike does not lose any steering precision, because the shape of the tire is more stabilized by the wider rim. On trails with larger bumps, you can even reduce the rolling resistance.
The rims are more stable than any aluminum rim. Compared to the standard aluminum rim mounted on idworx, the DaRim LaW-Trekking saves up to 75 grams per rim and improves the stiffness of the wheels as well as their stability. Size and alignment optimized spoke holes and an extra-reinforced profile ensure safety and extremely long life.

Extra stable rim made of extremely durable aluminum alloy, with spoke holes optimized in size and alignment. The perfect upgrade for heavy riders and anyone who regularly pushes the maximum load on their idworx bikes. Only 29 inch.
The extra deep rim base makes tire mounting easier - even with TLE tires.

The disc brake for maximum performance and stability trekking and travel bikes, but also for mountain bikes. The brake caliper and brake levers combines the proven Hope V2 brakes, with its own idworx, 203 mm wide, 3,2 mm thick discs.

Our new idworx Medium Disc is the perfect way to significantly improve the performance of the Shimano XT 8100 Trekking disc brake. Thanks to the special design of the braking surface, we significantly increase the braking performance (dry and wet braking performance) compared to the standard Shimano brake disc, while still maintaining good controllability. The special steel alloy in combination with 2mm thickness allows us to achieve better heat dissipation and a more stable pressure point. The wear indicators integrated into the braking surface make it very easy to see the wear limit of the disc. Available in 203mm diameter with 6 hole and 4 hole mount for Rohloff.
Available from March 2025

Only available for all idworx BLT models for even more off-road suitability and driving comfort.
The "Extreme package" includes:

1. Front and rear wheel in 27,5 Plus wheel size.
2. idworx DaRim Disc 40 Plus alloy rims.
3. Schwalbe G-One All-round tires in 70-584.